877-566-5369 sales@koolmat.com

RACING / KARTING / MOTORCYCLES

RACING

#07063 Koolmat Shifter Boot SFI Approved

SFI Shifter Boot – NASCAR Black Carbon X/Gentex Approved and required. Back side Gentex lined.

We make other shifter boots and can make or reproduce any type today. Just call and send us you shifter boot and we will give you a quote and remake your style shifter boot.

Call us at our toll free number 1-877-566-5369 as for Pat.

#07068 Mechanic Sleeve

Hi Temp Carbon X  Fire sleeve (1)
12′ long and 12″ around, Black
CarbonX knitted 2000° F. Kart Elbow Arm sleeve that stop burns & scars to elbow and arms. non-flammable, can be adjust up and down the arm, (one size fits all) will not burn or shrink.

#07072 CarbonX Mechanics’s gloves (set)  

Carbon X – 4 oz.  Black color only, (one size it all)   This product is manufactured with CarbonX textiles from proprietary and inherently nonflammable fibers produced by Chapman Innovations.  Gloves are used by Mechanics, School Cafeteria workers.  see #07068 for CarbonX  Elbow/Arm Sleeve for more coverage.

#07073 Heel Boot Protectors w/Koolmat for RACING TEAMS!

Fits Men 8-10  (1)            

The Heel Booty finally has a New Koolmat Insulation heel to stop extreme heat or burns to the bottom of the race car drivers foot. Don’t be fooled with a simple light gray vinyl piece, make sure you have the (ORIGINAL KOOLMAT BOOTY that the NASCAR teams use today not shown)

#09062 Heatbuster Panel – Air Pocket

12″ x 10″ x 1/4″ – Kmt/Nomex

The” Heatbuster” Nomex/Koolmat panel is an “Air Pocket” to raise and separate the foot/RT leg from the metal floor and exhaust. The heat passes under your feet below the Heatbuster and stays in the metal floor. It can be cut in pieces to fit foot/leg and tunnel areas and can be used to eliminate the majority of heat to the driver foot area. Rivet, screw or glue in place. FOR EXTRA PROTECTION cover the entire front floor with extra Koolmat Insulation to really keep the heat out of your airspace. Koolmat can be installed over any air pocket you make today.

(1-lb. density-1/8″cell- aircraft grade-size 10″ x 12″)

CUP/NASCAR Truck Floors: If you have Insulation on the floor raise up a section, rivet the panel under the foot and re-install the insulation over top. Cover inside of seat between seat belt restraints / mount around the oil tank itself or the outside of box or outside back of the seat area. This lowers the amount of heat affecting your back side.

Patch: Using just a patch – make sure your insulation or the Koolmat is at least 4 to 5 inches longer and wider than the Heatbuster panel, the panel can be rolled around the object or cut to fit the shape. Then, center the Koolmat over the panel, rivet or bolt in two spots to hold securely in place. Lay the panel in place on the floor (make sure the panel is in the foot area), and then fasten. You can cover the panel completely with more Koolmat Insulation. You need #07033 is a 4’ x 30” section.

Place on floor to raise up foot…heat will pass under it…

Air Box Fast Fix– Wrap Koolmat around the OLD air box and set it up off the floor will keep working entire race.

Carbon X – 4 oz.  Black color only, (one size it all)   This product is manufactured with CarbonX textiles from proprietary and inherently nonflammable fibers produced by Chapman Innovations.  Gloves are used by Mechanics, School Cafeteria workers.  see #07068 for CarbonX  Elbow/Arm Sleeve for more coverage.

#Basalt or Graphite Header Wrap

2″ x 50′ – basalt

 

 

KARTING

Item #07066 Kart Clutch Cover

 Clutch Cover, covers an 8″ x 14″ section of metal to stop extreme burns to arms. A composite with no glues inside E glass handles 1200°F. temps while outside silicone is good to 750°F. temps. Made of Koolmat Insulation will not fall apart will last many years, slips over metal and has 4 bolt holes for mounting.

Item #07068 – Kart Elbow Sleeves

CarbonX knitted 2000° F. Kart Elbow Arm sleeve that stop burns & scars to elbow and arms. non-flammable, can be adjust up and down the arm, (one size fits all) will not burn or shrink.

stretches  around 12″ x 12″ length

Item #07069 – Kart Exhaust Sleeves

1200° Natural color E Fiberglass (1 piece) – 1-1/2″ x 18″ – designed to cover exhaust on Karts to stop burns and keep heat in for better performance.

Item #07070 – Bandolero Exhaust Sleeves 45″                                      

Exhaust Sleeves (set  2 pieces) – 1-1/2″ x 45″ 1200° F. woven E fiberglass designed to cover exhaust and hold heat in for better performance. Go Faster!

MOTORCYCLES

  #07000-30 Harley Saddle Bag

Piece needed – 12″ x 30″ Koolmat piece

To Stop heat with Koolmat Insulation. Measure bottom of outside leather bag, noting white side will face heat. Spray paint with 2000° black header paint the white fiberglass side of the Koolmat glass. Once dry place item on bottom of the item sitting on bottom of the leather bag, add special studs to fasten on, attach the bag.  No More Heat… Melting!!!!  See price sheet for details.

#07000-30 Honda 2005 Fairing Strip

Measure the area. Our material is 30″ wide. All we need to know is the length.

Honda 2005 fairing strip that was melting from exhaust heat. Added the Koolmat with fiberglass facing the exhaust and glued to the fairing strip. It is good to 1200°F. temperature and stops the fairing strip from Melting.

Pictures of a Honda 2005 fairing strip that was melting without Koolmat.